Capacity
34.8 kWh
Voltage
346 V
- Min 240 V
- Max 403 V
Dry Weight
288 kg
Dimensions (LxWxH)
- 817 x
- 787 x
- 430 mm
Parameter |
Value |
---|---|
Pack Capacity |
34.8
|
Pack Capacity Derated¹ [kWh] |
33.5
|
Usable Capacity (for>4000cycles) |
94%
|
Max Charge Current [A]² |
202
|
Continuous Charge Current [A]² |
202
|
Continuous Discharge Current [kW]² |
69.9
|
Max Discharge Current [kW]² |
69.9
|
|
|
Pack Configuration |
96S 24P
|
No. of Modules |
06
|
Module Type |
6-16S
|
Module Configuration |
16S 24P
|
|
|
Housing Material |
Aluminium 5251 |
IP Rating |
IP 67 |
|
|
Pack Cell Count (configuration) |
2304
|
Pack Voltage (min, nom, max) |
240, 346, 403
|
Pack Voltage Derated (min, max)¹ |
288, 398
|
|
|
DCIR (1C, 10s, 25°C) |
0.092 [Ohms], 0.108 [Ohms], 0.120 [Ohms]
|
DCIR Growth at 80%. SOH (1C, 10s, 25°C) |
24%
|
Short Circuit Current (ignoring fusing, at 25°, at 100% SOH) |
3000 [A], 5038 [A]
|
Fuse Current (Cell-Level Fusing)³ +/- 10% |
600
|
Fuse Current (MSD) |
630
|
Specific Power |
601
|
Volumetric Energy Density |
126
|
Gravimetric Energy Density |
121
|
Module Properties |
Value |
---|---|
Module Type |
6-16S
|
Cell Properties |
Value |
Cell Type |
21700 Cylindrical EN |
Cell Properties |
Value |
Type |
Liquid Cooling (Cell Side-Wall) |
Coolant |
Water Ethylene Glycol (WEG) 50/50 |
Wetted Surfaces |
Polyethylene Plastic |
Max coolant pressure (gauge) |
1 Bar |
Nominal Coolant Inlet Temperature |
20°C |
Coolant Connector Type |
Araymond VDA QC NW20-XA2 |
Coolant in Pack |
2.7 |
Nominal Coolant Flowrate¹ |
60
|
Pressure Drop at nominal Flowrate |
94
|
Parameter |
Value |
---|---|
Discharge Temperature Range |
-20°C to 60°C |
Charge Temperature Range¹ |
0 to 45°C |
Storage Temperature: 1 year (SOC <30%, 60% Relative Humidity Max) |
-20°C to 25°C |
Storage Temperature: 3 months (SOC <30%, 60% Relative Humidity Max) |
-20°C to 45°C |
Storage Temperature: 1 month (SOC <30%, 60% Relative Humidity Max) |
-20°C to 60°C |
Humidity, Pack Operating (<25°C) |
0-100% |
Max Operating Altitude[m]² |
9000 |
Min Operating Altitude [m]² |
-4000 |
Pollution Degree |
II per UL 60950 |
Breathable Vent |
Gore PMF200542 |
Parameter |
Value |
---|---|
Type¹ |
Amphenol HVSL1000023a150 |
Max Continuous Current |
500 A |
Max Voltage |
1,000 V |
IP Rating |
IP67 |
Connection |
Connection type |
---|---|
LV communication |
TE 776163-5 |
Manual Service Disconnect |
Amphenol PCD MSDXLM630 |
HV Contactors |
EV200HAANA |
HV Contactors |
500 A |
Max Continuous Current |
300 A |
Max Making Current |
100 A |
Precharge Circuit |
|
---|---|
Precharge Contactor |
Panasonic HEV2aN-P-DC12V |
Precharge Resistor Value¹ |
1kOhm/100 Ohm |
Precharge Condition |
97% Link Voltage within 6 seconds |
Max DC Link Capacitance |
3,900 uF |
Master BMS |
|
---|---|
Isolation Monitoring |
500Ω/V (Minimum 500kΩ) |
Internal Datalogging |
32GB SD Card |
Crash Detection Method |
+/- 32g (3-axis accelerometer / gyroscope) |
Humidity Sensing |
10% to 90% RH |
Overvoltage Monitoring |
Cel,, Pack and Link |
Undervoltage Monitoring |
Cell, Pack and Link |
Overtemperature Monitoring |
Module level |
Undertemperature Monitoring |
Module Level |
Overcurrent Monitoring |
Pack Primary and Secondary current shunts |
HVIL |
20 mA Current Source / Sink |
|
|
Power Supply: |
9-32V |
Number of Slave BMS supported: |
24 |
Number of cells in series for total system: |
384 |
Range of high voltage measurement: |
0 - 1,000VDC |
Accuracy of high voltage measurement: |
±2% |
Primary Current Shunt Current Range |
± 800 A |
Accuracy of Primary Current Sense |
±2% |
Secondary Current Shunt Range |
± 1,000 A |
Accuracy of Secondary Current Shunt Range |
±5% |
Standby Consumption: |
<0.02 W |
Active Consumption: |
<35 W Nominal, <120 W Peak |
Communication interface, master-slave: |
Differential pair daisy chain |
Supported CAN communication type: |
CAN J1939 |
Supported CAN speeds¹ |
250, 500 kbps |
Number of CAN ports: |
3, internal, telematics,VCU |